1.Docuss can be divided into ceramic heating, PTC heat generating body, and heating flux heating body according to the different heat generating body. The advantage of ceramic heating is environmentally friendly, the temperature rise rate is fast, generally 30 seconds to 45 seconds to make the surface temperature of the splint surface Since the ceramic heating is sintered at a high temperature of 1000 degrees, the temperature will be rapidly more than 300 degrees after the circuit is lost, and the plastic material of the heat-fixing plate will be burned, so that the heating plate is falling off, it is possible It will be exposed to the user and scald the skin.

PTC is an abbreviation of POSTIVE TEMPERATURE COEFFICIENT. Translate is a positive temperature coefficient, referred to as a PTC thermistor. PTC is also sintered at high temperatures, but the highest temperature of his surface can be controlled while sintering, according to the requirements of the manufacturer, Sintering the surface to 280, or any temperature you want, usually sintered to 230 degrees to 280 degrees. But it's a shortcoming that the speed is slow to 200 degrees, usually in one or two or 2 minutes. In use, it is not possible to remain at a higher temperature like a ceramic heating body. The effect of straightening hair is slightly different.

2. The hair straightener is different according to the material of the heating plate, which can be divided into: pure ceramic heating plate, surface spray ceramic glaze aluminum plate, microcrystalline glass plate

The benefits of ceramic heating plates are environmentally friendly, good insulation, good security, and disadvantage is that the processing cycle is long and the processing is more, and it is very smooth, and it will slightly haircut during straightening hair. The benefits of aluminum plate spray ceramic glaze are easy to produce, and due to mechanical molding, the edge is very smooth, and it will not be hair. Since the surface is the ceramic glaze, the hairpin effect is also very good. Diffility is because it is metal, itself is not intensive, Insulation treatment for internal heating body to avoid leakage causes safety hazards.

The microcrystalline glass plate is relatively small, mainly the degree of smoothness of its surface is not as good as ceramic glazing, and it is not easy to form a fixation, and the product structure is designed.

3. Document is distinguished from structurally, which is generally divided into two types of V-type and X-type. Early epidemic X-type, but this year's V-type is more popular. Because the V-type can not only straighten the hair, the appearance streamline type straight hair It can also be used to curly hair, more and more hairdresser never hairpers are curled.

4. Document is divided into line with different power supplies, divided into wired straight hair and wireless charging straight hair

The wired hair straightener is a hair straightener that is powered by the power supply, and the wireless chargeable hair straightener is charged with the rechargeable battery, and the battery is used as a power supply.

The advantage of the wired straight hair is to work continuously. The disadvantage is that if the control is unreasonable during the design of production, there will be a safety hazard, and there is a power cord in addition to the use of a power cord. In addition, it is inconvenient. Wireless straight hair The advantage of being safe because it is a tributary power supply, and it is convenient to travel to travel. However, the shortcoming of the wireless straight hair is that it can only work 30 minutes to 1 hour after charging.

5. Documentary can be divided into width board, medium plate, narrow and mini type according to size division

The length of the linear panel of the wide-board hair strainer is generally 90mm, the width is 42mm, the length of the lineage of the medium plate is generally 90mm, the width is 24mm, the length of the strands of the narrow plate is generally 80-90 mm, the width is 13-14mm, the mini-stranded length is generally 60mm, and the width is 13-14mm.

6. Documentary is divided into normal and dry wet two types according to the diameter type. The ordinary hair straightener must blow the hair when the hair is pulled to start harass, and the dry wet two use can be pulled. The straight hair plate of the dry and wet two-type hair straighteners should have 8-10 gas holes, so that the water can become steam from the air hole.

Our TEEJOIN factory specializes in hair straighteners, wireless hair straighteners, portable hair straighteners, corded hair straighteners, normal hair straighteners, wet and dry hair straighteners, to know more, please contact us!

Learn More TEEJOIN's Hair styling Styler please Follow us!